Topeka, KS(785) 329-9250

Gate Installation and Repair in Topeka, KS

Topeka Quality Fence handles gate installation and repair across Topeka, KS, from a 4-foot walk gate to a pair of driveway gates. A level goes on the post the gate hangs from before anyone touches a hinge. Crews also hang gates in Silver Lake, Auburn and Lawrence.

Request a quote

Say where the fence goes and what it has to keep in or out. Someone calls back with a per-foot range.

Only the person pricing your fence sees these details. They are never sold or passed on.

Gates that have started to drag on the ground typically mean that the post holding the gate up, the one it hinges from, has started to sag or lean over due to years of the gate hanging on it. It can also be that the gate has failed in its structure and strength, but the posts are okay.

  • Hinge post checked for lean before any hinge is touched
  • Braces set to push the load toward the hinges
  • Driveway gates planned to open inward
  • Latch lined up after the post concrete cures
  • Gap at the bottom sized for the slope it swings over
Red board double gate with a slide bolt latch set into a wood fence

At a glance

ItemTypical figure
Fence gate, installedUsually $150 up to $500
Manual driveway gateBetween $300 and $1,200
Garden gate, wood or vinylBetween $300 and $600 hung
Automatic driveway gate$1,900 up to $6,000 installed
Gate repairBetween $50 and $400
Repair labor$50 up to $100 an hour

Gates We Build and Fix in Topeka

  • Wood picket garden gate under an arbor between green shrubs

    Backyard Walk-Through Gates

    Sized for a wheelbarrow, on a steel frame with a diagonal brace that keeps it square.

  • Pair of wide board gates closed across a gravel driveway

    Driveway Gate Pairs

    Two leaves that meet in the middle, held shut by a drop rod into a sleeve in the ground.

  • Weathered board gate leaning out of line beside an old fence post

    Fixing a Gate That Drags

    Loose hinges are about an hour's fix; a leaning hinge post is a day's work to reset.

  • Steel slide bolt with a padlock on a wood gate

    Hinges, Latches and Drop Rods

    Hinges, latches and drop rods are all terms for what holds up the gate and how it locks in place. Spring hinges are recommended for homes with pets so that the gate always closes behind you. Padlockable latches are great for security.

More Gate Work

  • Gates in Chain Link Fences

    Pipe-framed gates that match the mesh. For the run itself, see chain link fence installation.

  • Rolling Gates for Lots

    It rides sideways beside the fence where trucks need 12 feet or more.

  • Adding an Opener

    A motor and keypad go on a driveway gate whose posts and frame are stiff enough.

Why Does a Gate Sag?

When a gate starts to sag, usually the first thing that gives is the post that holds the gate. The gate acts and works like a lever, so an 80-pound gate can put over 200 pounds of force on the post trying to hold it upright. If there is a gap where the hinges are, it could be that the screws came loose in the hinges and need to be redone.

When the gate itself is the fix

With a plumb post, the frame has gone out of square. A wood brace climbs from the hinge side toward the latch, pushing weight back onto the hinges; fitted the other way, it does nothing.

When the hinge post has to go

Any hinge post rocking or sitting in cracked concrete comes up and goes back in, deeper and wider.

Hanging a Gate That Still Swings in Ten Years

  1. Width and swing

    We size the opening for a mower or a car. Driveway gates open inward, since the code allows no part of a fence in the public right-of-way.

  2. Sight lines

    City code bars a fence from the sight triangle at a driveway or corner, so a tall leaf gets set back.

  3. The hanging post

    The heaviest post on the fence, set toward the 36-inch frost depth in Topeka’s code.

  4. A square frame

    Steel frames hold their shape; wood frames get a brace before any board goes on.

  5. Hardware and test

    Hinges go on once the concrete has set, the latch last. We swing it until it shuts on the first try.

Gate Cost in Topeka

Most fence gates typically run $150 up to $500 hung. No source prices gates for Topeka alone, so national ranges are the guide here.

Gate Installed price
Fence gate, most types $150 up to $500
Garden gate, wood or vinyl $300 up to $600
Manual driveway gate $300 up to $1,200
Chain link, manual $180 up to $1,000
Vinyl, manual $200 up to $1,100
Wood, manual $300 up to $4,000
Steel or aluminum, manual $400 up to $4,500
Automatic driveway gate $1,900 up to $6,000
Gate repair $50 up to $400

All rows are 2026 national averages, without the permit.

What changes a gate price

  • Material and width. A 4-foot chain link walk gate and a 12-foot wood pair are different jobs.
  • Posts. Setting or resetting the deep, footed uprights is most of the labor.
  • Automation. A motor and keypad add $250 up to $2,500 between them.

What affects the price

Every job is quoted after we see it. These are the things that move the number up or down.

FactorHow it moves the price
MaterialMesh-and-pipe gates start near $180 nationally, wrought iron near $600
WidthA pair for a driveway costs several times a single walk gate
The hanging postOnce it leans, digging it up and footing it again eats the bulk of a repair bill
HardwareSpring hinges, a padlock hasp and a drop rod each raise it a little
An openerMotors run $200 up to $2,000 and keypads $50 up to $500, gate not included

Get a quote on your gate installation and repair

Tell us roughly how many feet you need, how tall, and the material you have in mind. We call back with a per-foot range and what would move it: gates, a slope, or an old fence to tear out first.

Gate Installation and Repair FAQs

Is a dragging gate worth repairing?

We recommend repairing a dragging gate if the gate is still in pretty good shape. A few different things you can do would be to level up the post that is holding the gate and also put new or deeper screws into the hinges that might have come loose and let the gate sag a bit.

Which way should a gate swing in Topeka?

We recommend that a swinging gate almost always swing inward into the property, meaning no gate should swing into the right-of-way of a public walkway or driveway. Of course, if this is a sloped yard, the gate would have to open downhill, as it would be near impossible to open uphill.

Why won't my gate latch anymore?

When a gate fails to latch properly, it could mean the gate has sagged itself and needs to be rebuilt or supported, or the post has given way, letting it dip. If the gate still closes but does not latch, a quick fix can be moving the strike on the post so that it locks in place.

How wide should a driveway gate be?

A driveway gate should be wider than the widest vehicle you own, plus room for the mirrors, typically around 8 to 12 feet for a swinging gate and 12 to 20 feet for a rolling gate.

How much does an automatic gate cost?

Automatic gates can range in cost depending on what style they are, from $1,900 all the way up to $6,000 and more. The opener alone can cost $200 to $2,000.

Do I need a permit for a gate in Topeka?

We recommend checking into a permit in Topeka if this is for a new fence with a gate included. You'll most likely need a permit. If it is just a gate, probably not, but it's always best to ask first.

Request a quote

Call (785) 329-9250 to talk it through now, or describe the fence here for a callback.

Only the person pricing your fence sees these details. They are never sold or passed on.

Call (785) 329-9250Quote my fence